of 8

ATEX TOOLS FROM INGERSOLL RAND

0 views
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Share
Description
ATEX - EX Industrial Tools Certified ImpactoolsFully certified to classifications under the new European ATEX Directives 2014/34/EU. Safety: ATEX certification Ex h…
Transcript
ATEX - EX Industrial Tools Certified ImpactoolsFully certified to classifications under the new European ATEX Directives 2014/34/EU. Safety: ATEX certification Ex h IIA T6 Gb X allows these tools to be used inpotentially explosive atmosphere in compliance with European Community Directives 2014/34/EU.ATEXOur ATEX-certified impact wrenches and drills includes seven heavy-duty pneumatic tools for use in hazardous atmospheres. These ergonomically optimized tools are built with premium components to stand up to harsh environments and reduce the risk of sparks. These tools carry ATEX Ex h IIA T6 Gb X and ISO 80079-36 certification rating. The ATEX (Atmosphères Explosibles) Directive 2014/34/EU1 is the European Regulatory Framework for the manufacture, installation and use og equipment in explosive atmospheres. It defines the essential health and safety requirements for equipment and protective systems. International Standard Organization 80079-362 specifies requirements for design and manufacture of non-electrical mechanical equipment intended for use explosive atmospheres.ATEX-certified impctools MaskinSquare drive2131PSP1/2”2145QiMAX-SP3/4”2925RBP1TiSP3/4”2155QiMAX-SP1”2934B2SP-EU1”2940B2SP-EU1”3942B2TiSP1”3955B2TiSP1-1/2”4060802004006008001000150020003000400050007000Bolting TorquesDIN267 Bolt Grade: bolt grade consists of two figures which refer to the following characteristics of the bolt: 1st digit = 10% of breaking load in kg/mm2 - 2nd digit = 10% of ratio between minimum elastic limit and minimum breaking load.Bolt grade DIN2673.64.64.85.65.86.88.810.912.9Maks torque i NmM470.851.11.51.41.92.32.94.14.9M591.72.23.02.83.74.56.08.510M6102.93.85.14.86.47.7101417M8137.09.312121619253541M1017141925233137496983M121924324340546586120145M14223951686486105135190230M1624597910598130155210295355M182781110145135180215290405485M2030115155205190255305410580690M2232155205275260345415550780930M243620026535033044053071010001200M2741295390520490650780105015001800M30463955307106608801050145020002400M335054072096090012001450190027003250M36556909201250115015501850245034504150M396092012001600150020002400320045005400M4265110015001950185024502950395055506650M4570140018502450230031003700495069508350M48751700225030002800375044505950840010100M528021502900385036004800575076501080012900M568527003600480045005950715095501340016100M6090335044505950555074008900119001670020000M64954000535071506700895010700143002010024100M6810048506500865081001080013000173002430029100Pneumatic BoltingATEX Certifified Impactools 1/2” and 3/4” Safety: ATEX certification EX h IIA T6 Gb X allows these tools to be used in potentially explosive atmosphere in compliance with European Community Directives 2014/34/EU. Reliability: Ingersoll Rand Twin Hammer impact mechanism. Pressure-fed mechanism lubrication.2131PEXControl: feather-touch trigger allows precise delivery of power and speed. Service Kits 1/2” and 3/4” ModelDrive Size2131PEX 1/2” 2145QiMAX-SP 3/4” 2925RBP1TiEX 3/4”(A) Air motor KitsCPN A 45535028 47100011 04621736CPN B 80122153 47102561 -2145QiMAX-SP(B) Hammer Kits 2925RBP1TiEXP BAB ATEX ModelCPNProfileDrive SizeMax Torque (Nm)RPMBPMSound Vibration Level Level dB(A) M/S2 K(2)Weight lb (kg)Length (mm)Air InletMin Hose Size (mm)Air Consumtion I/s2131PEX2131PEXP1/2” (1)8139500125093.78.3/1.12.01901/4”1011.02145QiMAX-SP47122585P3/4” (1)18306300115096.38.7/2.73.352173/8”1315.12925RBP1TiEX2925RBP1TiEXP3/4” (1)21695200105098.010.5/1.05.442253/8”1328.0Technical Specifications at 6.2 bar (90 psi) dynamic pressure at inlet. (1) Hole-type square drives for use with socket retaining rings (see description page 8). (2) ISO28927-3-axis measurement: vibration level / measurement uncertainty.Pneumatic BoltingATEX Certifified Impactools 1” and 1-1/2” Safety: ATEX certification EX h IIA T6 Gb X allows these tools to be used in potentially explosive atmosphere in compliance with European Community Directives 2014/34/EU. 2155QiMAX-SPReliability: Ingersoll Rand Twin Hammer impact mechanism. Pressure-fed mechanism lubrication. Control: feather-touch trigger allows precise delivery of power and speed.2934B2SP-EUService Kits 1” and 1-1/2” ModelDrive Size2155QiMAX-SP 2934B2SP-EU 2940B2SP-EU 3940B2TiEX 3942B2TiEX 3955B2TiEX1” 1” 1” 1” 1” 1-1/2”CPN A 47100011 03803111 03803129 80167943 80167950 80166689CPN B 47102561 -2940B2SP-EU3940B2TiEX (A) Air motor Kits(B) Hammer Kits 3942B2TiEXPAB3955B2TiEXB ATEX ModelCPNProfileDrive SizeMax Torque (Nm)RPMBPMSound Vibration Level Level dB(A) M/S2 K(2)Weight lb (kg)Length (mm)Air InletMin Hose Size (mm)Air Consumtion I/s2155QiMAX-SP47122619P1” (1)18306300115096.38.7/2.73.362253/8”1315.12934B2SP-EU01337682B1” (1)2034660075097.918.8/3.710.02861/2”1922.02940B2SP-EU01337583B1” (1)2710500085097.817.8/3.48.403111/2”1927.03940B2TiEX3940B2TiEXB1” (1)37296000800106.613.1/1.69.63411/2”1935.03942B2TiEX3942B2TiEXB1” (1)44075000850103.416.9/4.610.53611/2”1944.03955B2TiEX3955B2TiEXB1-1/2” (1)67802750700102.020.8/8.515.74231/2”1937Technical Specifications at 6.2 bar (90 psi) dynamic pressure at inlet. (1) Hole-type square drives for use with socket retaining rings (see description page 8). (2) ISO28927-3-axis measurement: vibration level / measurement uncertainty.Pneumatic Drills ATEX Certifified DrillsSafety: ATEX certification EX h IIA T6 Gb X allows these tools to be used in potentially explosive atmosphere in compliance with European Community Directives 2014/34/EU. 7802RAKCSPReliability: Ingersoll Rand Twin Hammer impact mechanism. Pressure-fed mechanism lubrication. Control: feather-touch trigger allows precise delivery of power and speed.7803RAKCSPRetaining Rings Part no. CPN Qty. Internal Ø Material RR10001 49825524 10 15.0 mm Plastic RR10002 49825532 10 17.0 mm Plastic RR10003 49825540 10 19.0 mm Plastic RR10004 49825557 10 20.0 mm Plastic RR10005 49825565 10 22.0 mm Plastic RR10006 49825573 10 24.0 mm Plastic RR10007 49825581 10 24.0 mm Plastic RR10008 49825599 10 29.0 mm Plastic RR10005S 03816055 1 32.0 mm Plastic + Steel insert RR10009 49825607 10 33.0 mm Plastic RR10032S 03809258 1 36.5 mm Plastic + Steel insert RR10010 80206477 10 37.0 mm Plastic RR10034S 03809266 1 41.5 mm Plastic + Steel insert RR10008S 03809274 1 44.5 mm Plastic + Steel insert RR10010S 03809282 1 49.0 mm Plastic + Steel insert RR10015S 03809290 1 54-57 mm Plastic + Steel insert RR10017S 03816063 1 63.5 mm Plastic + Steel insert RR10019S 03809308IRI 1 67.0 mm Plastic + Steel insert RR10020S 03809316 1 76.0 mm Plastic + Steel insert RR10025S 03809324 1 86.0 mm Plastic + Steel insert RR10030S 03809332 1 98.5 mm Plastic + Steel insert RR10035S 03809340 1 111.0 mm Plastic + Steel insert Because of the elasticity of the material, the diameter at the female square drive of the socket (D2) can be slightly larger than the ring. Note: The retainer rings must have a tight fit on the socket.ATEX Drills ModelCPNProfileBore SizeMax Torque (Nm)RPMSound Vibration Level Level dB(A) M/S2 K(2)Weight lb (kg)Length (mm)Air InletMin Hose Size (mm)Air Consumtion I/s7802RAKCEX7802RAKCEXP10mm7200083.02.8/0.71.361751/4”1012.37803RAKCEX7803RAKCEXP13mm2850083.0>2.51.631631/4”1012.7Technical Specifications at 6.2 bar (90 psi) dynamic pressure at inlet. (1) Hole-type square drives for use with socket retaining rings (see description page 8). (2) ISO28927-3-axis measurement: vibration level / measurement uncertainty.Pneumatic Tools with Planetary gear ATEX CertififiedThe experience in gearbox engineering and design has brought about RAD’s latest generation in planetary gearboxes – RAD DX series. Designed for extreme duty use in a variety of industries worldwide, RAD DX series torque wrenches offer: • The best power-to-weight ratio • Wide torque range to suit multiple applications • Unmatched reliability delivered by one of the most advanced engineered gear boxes on the market • Very compact design resulting in lower weight and better accessibility • Controlled bolting - accuracy of +/- 4% and repeatability of +/- 2% ATEX CERTIFICATIONFRL Unit: • Low weight (2kg) tool holder made from High Density Polypropylene. • Includes pressure gauge, filter, regulator and lubrication.RAD pneumatic torque wrenches are optionally available with ATEX certification. The ATEX certification is applicable for all standard pneumatic RAD tools. The RAD pneumatic torque wrenches have been independently tested and approved by Bureau Veritas. Their recommendations and RAD’s subsequent tool modifications have resulted in the below classification which means our tools can be officially used in zones 1, 2, 21 and 22.ATEX RAD single speed ToolkitToolDrive SizeNumberModelInchesTorque (Nm) MinMaxSpeed Weight RPMNoise levelKgdBDimensions (mm) ABC15616100 SL3/4” or 1/2”351002752.1801616069222D15134275 SL3/4”50275902.280167606922213573475 SL3/4”70475652.48016760692221353910 GX3/4”150950303.48022863692281354914 GX3/4”2751.350203.68022863692281913520 DX1”4002.00093.98020369702051356534 DX1”7003.40096.18524677832412471740 DX1”1.2004.00086.68523086832641357146 GX1”1.4004.600129.08532586932642613370 DX1-1/2”2.0007.000810.78528592932641580580 DX1-1/2”2.7008.000712.58534810110127723229110 DX1-1/2”3.40010.800413.88543111411427926153150 DX1-1/2”5.40015.000319.085353127127281For ordering, send E-mail to: firmapost@mkl.no Or call us on: +47 22 90 02 00
Related Search
Advertisements
Related Docs
View more...
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks