of 108

Atomic Alpine Tech Manual 2018u002F19

72 views
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Share
Description
ALPINE 2018/19 TECH MANUALCONTENT ATOMIC WARRANTY POLICY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3bINDINGs ATOMIC BINDING UPDATE…
Transcript
ALPINE 2018/19 TECH MANUALCONTENT ATOMIC WARRANTY POLICY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3bINDINGs ATOMIC BINDING UPDATE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 SCHEDULE OF INDEMNIFIED BINDINGS . . . . . . . . . . . . . . . . . . . . . . 6 VISUAL INSPECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 MOUNTING BINDINGS / SELECTING AND USING THE JIG . . . . 8 DRILLING / GLUE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 SKI BRAKE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 MOUNTING INSTRUCTION RENTAL . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 FAT SKIS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 MOUNTING POSITION SKIS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-13 MOUNTING OF JUNIOR SETS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 BOOTS & BINDING COMPATIBILITIES . . . . . . . . . . . . . . . . . . . . . . . . . . 14 FORWARD PRESSURE ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . 15-16 BINDING BRAKE MODELS : BRAKING CAPACITY . . . . . . . . . . . 17MODEL DESCRIPTION X-RACE X20 EGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 X-RACE X 19 VAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 X-RACE X 16 VAR / X 12 VAR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 X 12 / NEOX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 JUNIOR RACE PLATE / JUNIOR RACE PEDAL KIT . . . . . . . . . . 25 XTO 14/12/10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 X-TRACK M XT 10 / M XT 10 TI / M XT 12 / M XT 12 TI . . . . . . 29 NR LITHIUM 10 EZYTRAK / NR L 7 EZYTRAK / NR C 5 EZYTRAK . . . . . . . . 31 EZYTRAK 2 WITH LITHIUM 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 EZYTRAK 3 WITH MERCURY 10 & 11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 N L 7 / N C 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 EVOX ++ & FFG ++ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 FFG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 WARDEN 11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 WARDEN 11 DEMO. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 FT11 GW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 FT12 GW. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 STH² 16 WTR / STH² 13 WTR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 TRACKER WTR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 WARDEN MNC 11 DEMO BINDING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 WARDEN MNC 11 BINDING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 WARDEN MNC 13 DEMO BINDING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 WARDEN MNC 13 BINDING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 TRACKER MNC BINDING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 SHIFT MNC 13 BINDING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 BACKLAND TOUR BINDING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 FINAL CHECKING BOOT/BINDING COMPATIBILITY DIAGNOSIS . . . . . . . . . . . . . . . 80 RENTAL-TEST & INSPECTION PROCEDURES . . . . . . . . . . . . . . . . 81 INSEASON SAMPLING AND INSPECTION / RELEASE VALUE SELECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 IMPORTANT INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 TROUBLESHOOTING PROCEDURES . . . . . . . . . . . . . . . . . . . . . . . . . 85 ADJUSTMENT CHART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86-87skI SKI PREPARATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 BASE FINISH / SKITIPS / CHASSIS / PLATES . . . . . . . . . . . . . . . . . 91bOOTs MEMORY FIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 MEMORY FIT FOR ALPINE BOOTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 ATOMIC MEMORY FIT FAQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 HOW TO: REPLACE BUCKLES (OR ANY OTHER RIVETED COMPONENT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 SIZING TABLE INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 ESTABLISHING THE CORRECT BOOT SIZE . . . . . . . . . . . . . . . . . 100ACTIVE PROTECTIVE HOW TO CHOOSE THE RIGHT HELMET: NORMS / HEAD MEASURER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 HELMET ADJUSTEMENT / STICKER DECLARATION . . . . . 103 SIZE CHART HELMETS/ CHANGE SIZE ADJUSTER. . . . . . . 104 GOGGLES / POLES..............................................BACK PROTECTORS......................................105106-107All rights connected with the Technical Manual are reserved by ATOMIC Austria GmbH. No parts of this Technical Manual may be reproduced or reprinted without indication of the source and prior explicit permission. All rights to change the technical details of the skis, boots and bindings and their accessories indicated in the Technical Manual are reserved.2GENERAl INFORMATION ATOMIC lIMITED WARRANTy POlICy Thank you for buying this ATOMIC product. ATOMIC distributes its products through its worldwide network of authorized ATOMIC distributors and retailers. You will find below all ATOMIC warranty policy details offered by ATOMIC and ATOMIC authorized retailers. This warranty policy is valid as of December 2nd 2015.I. lIMITED WARRANTy ATOMIC provides this warranty to consumers who purchased ATOMIC product (Product(s)) from ATOMIC or one of it authorized retailers. ATOMIC warrants all new Products to be free from manufacturing or material defects (Defects) for the Warranty Period as defined below. This warranty applies only against Defects discovered within the Warranty Period and extends only to the original purchaser of the Product. ATOMIC Products meet their description and specifications; it is your responsibility to ensure that the Products you purchase are designed for your intended use. This warranty is valid and enforceable only in the country where the Product was purchased by the original purchaser, provided that ATOMIC has intended that the Product be offered for sale in that country. This warranty is also enforceable in any country within European Economic Area where ATOMIC has an authorized importer, subsidiary or distributor. Please refer to the ATOMIC authorized retailers list. Depending on the country, particular and variable warranties may apply in relation to applicable legislation. Nothing in this warranty policy can exclude or limit these statutory provisions. Warranty Period The Warranty Period starts on the date of the retail purchase of the Product by the original purchaser. The Product may consist of several different parts and different parts may be covered by different Warranty Periods (please refer to the Warranty Periods below for all warranties that may apply to your Product). The Warranty Periods are: a. Three (3) years for winter sports trousers and jackets b. Two (2) years for all other Products To the extent permitted by national laws, the Warranty Period will not be extended, renewed or otherwise affected due to subsequent resale, repair or replacement of the Product. However, part(s) repaired or replacement Product(s) issued during the Warranty Period will be warranted for the reminder of the original Warranty Period only; provided, such replacement or repair has been performed by ATOMIC or an authorized ATOMIC retailer. Depending on the country, particular and variable Warranties Periods may apply in relation to applicable legislation. Nothing in this warranty policy can exclude or limit such legislation.II. CONDITIONs AND REsTRICTIONs This Limited warranty does not cover: a. Normal wear and tear of the Product b. Defects caused by the Transportation (other than the initial delivery from ATOMIC to the purchaser) or storage of the Product c. Defects or damage caused by improper use or poor maintenance d. Damages due to non observance of the instructions of the products owner manual e. Damages due to the modifications of the Product f. Any impact caused by sharp or hard items or objects, due to torsion, compression, a fall, an abnormal impact or other actions not under ATOMIC’s reasonable control. This limited warranty is not enforceable if: a. The Product has been modified or repaired by any person or entity other than ATOMIC or an authorized ATOMIC retailer b. The Product has been repaired with unauthorized spare parts c. The Product serial number has been removed, deleted, altered or made illegible.III. WARRANTy ENFORCEMENT ATOMIC or its authorized retailer shall at its sole discretion either (a) repair the Product or (b) replace the Product at no charge. The appropriate remedy will be determined by ATOMIC based upon the following considerations: (a) the value of the Product with no Defect, (b) the significance of the Defect, and the inconvenience each remedy would place on the original purchaser. ATOMIC agrees that all repair or replacement of the Product will occur within a reasonable period For all warranty claims, please submit the Product and the proof of purchase to the nearest authorized ATOMIC retailer or in the event you purchased the Product on ATOMIC Online Store, please contact Customer Service. For all warranty claims, please refer to the FAQ/RETURN POLICY available on: www.ATOMIC.comIV. DIsClAIMER AND lIMITATION OF lIAbIlITy TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE MANDATORY LAWS, THIS LIMITED WARRANTY IS YOUR SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED. ATOMIC SHALL NOT BE LIABLE FOR SPECIAL, INCIDENTIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LOSS OF ANTICIPATED BENEFITS, LOSS OF USE, LOSS OF REVENUE, COST OF ANY STUBSTITUTE EQUIPMENT OR FACILITIES, CLAIMS OF THIRD PARTIES, DAMAGE TO PROPERTY RESULTING FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM THE BREACH OF THE WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, STRICT TORT, OR ANY LEGAL OR EQUITABLE THEORY, EVEN IF ATOMIC KNEW OF THE LIKELIHOOD OF SUCH DAMAGES. ATOMIC SHALL NOT BE LIABLE FOR DELAY IN RENDERING WARRANTY SERVICE.3bINDINGsBINDINGS4bINDINGsIMPORTANT NOTICE – ATOMIC bINDING UPDATE The changes to our 2018-19 Binding Indemnification List reflect Atomic USA’s position regarding discontinuation of service on any bindings which are beyond their usable life. Each year, Atomic USA reviews its Binding Indemnification List. New models are added, and in some instances, older models are removed from the list. Older models are dropped to enhance the safety of skiers, and to encourage skiers not to use aged bindings for longer than their reasonably useful life. In particular, in 2008, Atomic announced a recall of certain bindings manufactured between 1998 and 2002. The bindings subject to this recall are now 12-16 years old. These bindings have been removed from 2013 Binding Indemnification List, as the bindings are beyond their useful life. This removal is consistent with Atomic’s policy on Binding Indemnification. No other bindings from 2002 or earlier are recommended for service on the Binding Indemnification List. In summary, skiers are best served when they are encouraged to stop using bindings that are deemed beyond their usable life by Atomic USA, or bindings which show excessive wear. Models named “RACE 10.18” and “6.14” are the only models that have been produced over a period of time which allows some vintage to be on the list of indemnified bindings, and others that have been removed from the list. For these models, dealers should refer to the included color poster (shown on the inside back cover of this document) to identify the cosmetics that are still covered under the list of indemnified bindings. If the dealer encounters a version of the “Race 10.18” or “6.14” that is not on the attached color poster, then Atomic recommends that binding should be replaced by the skier for his/her maximum safety, and should not continue to be serviced by the dealer.If consumers have additional questions regarding the recalled bindings which are no longer recommended for use due to their age, then please direct them to Atomic’s toll-free Recall Hotline at (888) 5357555 between 8 a.m. and 4 p.m. MT Monday through Friday: e-mail consumerserviceUS@atomicsnow.com >>>5bINDINGsATOMIC RETAIL & RENTAL & DEMO X 20 EGA X 19 VAR X 19 MOD X 16 VAR N STH WTR 16 X 14 TL RS OME N SHIFT MNC 13 N WARDEN MNC 13 NR WARDEN MNC 13 DT D WARDEN MNC 13 DT X 12 VAR X 12 TL OME E FT 12 GW M XT 12 Ti M XT 12 N Z 12 N WARDEN MNC 11 NR WARDEN MNC 11 DT NR FT 11 GW EZY3 E FT 11 GW E MERCURY 11 E LITHIUM 10 NR LITHIUM 10 EZYTRAK N Z 10 EL7 NR L 7 EZYTRAK NL7 EC5 NR C 5 EZYTRAK H C 5 SR NC5 N BACKLAND TOURBefore performing any assembly or adjustment of the system for the customer, a careful check and evaluation of each system’s components is necessary. SKIBOOTS: Most modern ski boots conform to the ISO/DIN 5355 standard, which specifies important dimensions in the toe and heel area as well as material properties to ensure compatibility with the binding. Check: – the boot for any irregularity of the contact zones with the binding. – the boot for excessive wear in the boot toe and heel area. Heel wear is acceptable as long as stepping into the binding is smooth and uninterrupted. The dimensions of the critical toeinterface areas should fall within the limits shown in the figures. – the boot sole in the heel area for cut outs that catch the treadle or impair the brake function. – all boot components such as buckles, fitting devices or rubber inserts for proper function and condition. Boots which do not meet these criteria should berepaired or replaced.INTERFACE TOE30+/–1INTERFACE HEEL15+/-2SKIS: Check the skis for: – mounting screws protruding through the base. – delamination of side walls and/or top layer. – signifi cant bends. – condition of the edges and base.619+/–1min. 9FINAL SEASON K XTO 12 K XTO 10 E XTE 10 E XTE 7 N EVOX 045 N FFG 12 N FFG 10 N FFG 7 N FFG 12 ++ N TRACKER MNC 16 N TRACKER MNC 13 N WARDEN 11VIsUAl INsPECTIONmin. 25sChEDUlE OF INDEMNIFIED bINDINGsbINDINGsbINDING: Check: – if binding is on the indemnification list – condition of the toe wings. – contamination. – condition of the AFD’s. If they are not smooth or show signs of signifi cant wear, they should be replaced. – broken toe housings or toe wings. – jammed toe height adjustment screws. – indicator scales. – heel track functioning smoothly. – broken heel housing or heel lug. – jammed release adjustment screws. – bent brake arms All ATOMIC bindings could only be used for boot typ “A“ ISO 5355. IMPORTANT: Be sure to remove the brake retainers from the bindings before attempting to enter a boot into the system; failure to do so can result in adjustment errors. Adjust both bindings to the zero position before you begin adjusting the system. Final Check / Testing and Adjustment The final check acts as a quality control of your system assembly. Verify that: – all components are suitable and compatible – the bindings are aligned properly – the mounting point is correct – the VARIOZONE position is set to zero-all screws are tight and snug – toe height and forward pressure are set correctly. – the release setting is made correctly according to the Adjustment Chart. To guarantee the best possible quality function of the skiing equipment before delivery to the customer, a fi nal testing of the system is required for new equipment as well as for used equipment, or whenever an operation conducted may have affected the release values of the system. – Using a calibrated testing device, according to it`s instructions for use, exercise each binding component at least once in each possible direction. Then measure the twist and forward lean torque values. Use the middle quantitative value of three releases in each directions as test result. – Compare the test results with the skier`s Reference Torque Value in the Adjustment Chart and proceed as follows: – Check, that the measured values fall inside the limits of the ”Inspection Range”. The Inspection Range is from one Reference Torque Value above to one Reference Torque Value below the skier Reference Torque. – If the tested values for clockwise and counter-clockwise toe-release fall near the opposite limits, there may exist an installation error or an incompatible boot. Check the system again and re-test, after the problem has been fixed. – If both, twist and forward lean results, fall within the Inspection Range”, mark the corresponding cells on your WorkshopForm with ”pass”. – If at least one of the twist or forward lean release value test results falls outside the ”Inspection Range”, but is within the ”In-Use- Range”, readjust the indicator setting of the corresponding component to achieve a test result as practicable to the Reference Torque Value. The ”In-Use-Range” is from two Reference Torque Values above to two Reference Torque Values below the skier Reference Torque. If the measured values still fall outside the ”In-Use-Range”, the system should be considered unusable and no further adjustment should be performed.INsTRUCTIONs AND WARNINGs TO ThE skIER Advice for your customer to select an appropriate model is a very important service of the shop. The recommendation should aim for a binding, for which the customer’s recommended indicator setting of the bindings is not closer than 1.5 indicator numbers from either end of the binding’s range. The final and one of the most important procedures before delivering the system is to provide the skier with all necessary instructions and warnings, when he/she picks up the equipment. Bindings: – Explain how the system works and what function the bindings have. – Explain the different possibilities of stepping in and getting out of the binding. – Demonstrate how to separate the skis by sliding one ski in the direction of the ski tip and pulling both skis gently apart. Adjustment: – Check together with the customer the release adjustment settings by verifying the data listed on the workshop form. The skier should always be aware of his/her individual indicator value. – Point out the potential danger of self-readjustment. Extra Features: – Explain how to adjust the bindings to different locations on the ski and emphasise that the
Related Search
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks